Lenovo S60-w Official Stock Rom

Firmware Info

ROM versionAndroid: 4.4.4 VIBEUI_V2.0_1516_5.51.1_ST_S60-w

Additional info

This is original firmware for chinese version of Lenovo S60-w. This is only for Lenovo S60-w.

It contains all files: system, boot, modem, recovery etc. without Gapps .

Warning:
This ROM will wipe all userdata! Except external SD Card.
If phone after flash won’t boot up and only long vibrating long hold: VOL- and POWER BUTTON (30-120 seconds). Phone should restart.It happens when you will flash from other versions loader (for example 5.0.2 -> 4.4.4 or 4.4.4 -> 5.0.2). Why? Because old loaders is running and you have flashed the new one so you have to restart the phone but u can’t remove the battery and u have to long press PWR Button.

You should first backup QCN (imei etc.)! How to:

Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
Turn off the phone. Hold Vol- button and plug-in USB Cable. (VOL- and Power Button runs something like recovery menu)
There should be devices in device manager: Ports COM called:
Lenovo HS-USB Diagnostics (COMXX)
and
Lenovo HS-USB NMEA (COMXX)
If there is no devices u have to install it manually in device manager.
Run QFIL, check is there a correct diagnostic port COM. On the top click: Tools > QCN Backup Restore
Choose path with write permission, click Backup QCN

needrombd

Version info:

VIBEUI_V2.0_1516_5.51.1_ST_S60-w_qpst
S60-w_USR_ST1516_5.51.1_1504151037_Q1001419.1_CN

Android 4.4.4 (RAM 2GB, ROM 8GB)

English and Chineese language only

How to flash:

  • Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  • Turn off the phone. Hold Vol+ button and plug-in USB Cable. Phone will vibrate one time, screen will be black. This is Download Mode.
  • There should be device called in device management:
    Qualcomm HS-USB QDLoader 9008 (COMXX)
    In any other case u have to install drivers manually.
    Run QFIL.
  • Click Browse… in Programmer Path and choose prog_emmc_firehose_8916.mbn
    Load XML in Download Section:
    First select RawProgram File: rawprogram0.xml
    then Select Patch File: patch0.xml
    Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:

hhhhh

In emergency cases:
How to reset phone from QDLOader Mode: hold power button for 30-120 seconds
other possibility: hold vol- and vol+ and pwr button (all buttons) for some time
or try hold any button and connect USB.

credit: Lenovomobile

Comments