InfinityBox install CM2MT2 Module is Ready to Download.After Long time Infinity Team updates there cm2 MTK Dongle. Download InfinityBox install CM2MT2 from below link and enjoy. Remember ! This file work with Dongle only it’s not Crack .
InfinityBox install CM2MT2 v2.00 Setup Download:
Whats New On InfinityBox install CM2MT2 v2.00 ?
MTK 6570 CPU support:
⇒ with NAND memory
⇒ with eMMC memory
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware – Factory Scatter format [ NAND supported – WorldFirst and unique! ]
⇒ Write Firmware – Factory Scatter Format [ NAND supported – WorldFirst and unique! ]
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
MTK 6750 CPU support:
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware
⇒ Write Firmware
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
MTK 6755 CPU support:
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware
⇒ Write Firmware
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
MTK 6757 CPU support:
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware
⇒ Write Firmware
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
MTK 6763 CPU support:
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware
Write Firmware
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
MTK 6797 CPU support:
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware
⇒ Write Firmware
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
Under Test ——
MTK 6758 CPU support:
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware
⇒ Write Firmware
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
MTK 6739 CPU support:
⇒ with NAND memory
⇒ with eMMC memory
⇒ Read Info – Complete device info, Security info
⇒ Read Firmware
⇒ Write Firmware
⇒ Read NVRAM
⇒ Write NVRAM
⇒ Repair Security
⇒ Formay FS – FRP, Settings, Privacy ( and mixed/special mode )
⇒ MemoryTool
Main
⇒ New look and design. All simplified and optimized much, as possible. [ please refer to v2 interface introduction ]
⇒ New core. All code made from scratch.
⇒ New boot chain selection mode – automatic ( via defined user combination ) or manual.
⇒ New connection
⇒ Complete error handling and explanation
⇒ Internal EMIDB cover 99% of existing memory devices on both – NAND and eMMC devices
⇒ Easy end user customization for adding support for new device and e.t.c.
Flasher
– Completely new flasher design, which allow customize whole flashing process [ please refer to v2 interface introduction ]
FW Reader
– Completely new core, which allow handle all existing types and flash devices.
Service
– Security repair NOT require reboot to meta, not required CDC drivers or whatever else. All direct.
– Format FS include different mode, optimized for different secure devices type ( with FORMAT, WRITE protection )
– During NVRAM read/write SW also verify it condition and data
MEMORY TOOL activated!
Easy, fast and ultimate solution now come in MTK too!
⇒ Support eMMC and NAND flash IC`secure
⇒ Allow READ, WRITE, ERASE partitions
⇒ Show partitions states and info only for eMMC devices
⇒ Allow RE-init PMT ( from scatter )
Other
Lot of other changes from v1 line, which not mandatory to mention
Known issues/warnings/info:
1. [NAND on MT6570] v1712, v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases “stuck on logo” devices can be fixed only via FFU (whole flash) format!
1. [NAND on MT6570] UBI SPARSE image flashing may take MUCH time (up to 5 minutes and more) for some devices!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-write data, which you want, ignore “EMPTY” states.
4. [MEMORY TOOL] Old protocol secure devices (MT6750/MT6755) – LeEco and similar
In some cases WIPE partition may not work!
5. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND/eMMC devices! Result – stuck after system/userdata partition flashing
6. FileSyhstems flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution – exclude them from flashing list.
7. Device with NV_TYPE2 security may not work yet for repair sec!
Download InfinityBox install CM2MT2 Setup
Download File
credit: infinity-box.com