Welcome, visitor! [ Register | Login

How to Flash Samsung Android Mobile Using Odin

Flashing Guide March 29, 2017

we are going to guide you, How to use Odin software to Flash Samsung Stock Firmware, Custom Firmware or Root File.

Note: Flashing the Stock Firmware on your Samsung mobile will not void the device warranty, but flashing custom rom, root file or any other patch file will void the device warranty.

Using Odin Downloader to Flash Samsung Stock or Custom Firmware
Step 1:  Download and install latest version of Samsung USB Driver on your PC (if samsung drivers are already installed on the computer then SKIP this).

Step 2:  Download the Stock rom or Custom rom that you want to flash on your Samsung Devices (if you have already downloaded the firmware rom then SKIP this step).

Step 3:  Now, Turn Off your Samsung Device.

samsung Power off

Step 4: Now there , you have to boot your Samsung device into the download mode. To Boot into Download Mode- Press and Hold Volume Down + Home + Power Button for 5-6 Seconds.

samsung device download mode

Step 5:  Now Press Volume UP Key to Continue.

Samsung Download Mode Sign

Step 6:  Download and extract the latest version of Odin Downloader to your computer (if you have already downloaded Odin Downloader then SKIP this step) and Lunch it.

odin lunch

Step 7:  Now Connect your Device to the computer. Once your device successfully connected the device to the computer then you will be able to see the Added ! message in Odin log .


 odin connected

Step 8: Now, Click on the AP or PDA Button to load the stock firmware or custom firmware that you want to flash on your Samsung device.

odin file selection

Step 9: when, you have added the stock firmware rom on Odin3. Then Click on Start Button to begin the flashing process.

odin flash start

Step 10. Full Flashing process may take upto 5-15 minutes and when flashing process is completed you will be able to see the Green Pass ! message. After this process your device will restart automatically.

flash done by odin

💡  If your device is stuck at the Samsung Logo after flashing the stock firmware rom for more than 10-15 minutes, then boot your device into the recovery mode. To boot into recovery mode- Press and Hold Volume UP+ Home Button + Power Button for 6-8 seconds.
💡 In recovery Mode Select Wipe Data / Factory Reset.

💡 Once Data / Factory Reset is Done. Restart your device.

💡 Now, your Samsung device will restart without any issue with the stock rom or custom rom you have downloaded.


16438 total views, 5 today


Sponsored Links

Leave a Reply

You must be logged in to post a comment.

  • Mi Account Unlock Tool Free Download

    by on August 8, 2017 - 0 Comments

    Download Mi Account Unlock Tool for free – Remove Or Bypass Mi Cloud account Verification. Mi account unlock tool is a very small Computer tool which can help you to remove or unlock your Mi account-if your device asking “this device may be associate with existing Mi account”. Same as you can remove or bypass Mi […]

  • Maui META imei Repair Tool All Version

    by on November 23, 2017 - 0 Comments

    Maui Meta 3G/4G Latest /Old tool and free download links are available for download. It is very useful Tool for all mediatek Based Phones and android devices. Maui META also known as SP Meta is a tool that enables you write IMEI, Serial number etc to a Mediatek Android phones .You can use it to […]

  • Android Fastboot FRP Reset Tool Download [Free]

    by on October 1, 2017 - 0 Comments

    Android Fastboot  FRP Reset tool  is a very small Computer tool which can help you to remove various  FRP  lock . Android FastBoot Reset Tool updated version is released and is ready for direct download for our site . Using this software you can remove Android FRP without any  premium box. This tool works on […]

  • How to Flash Stock Rom using Smart Phone Flash Tool

    by on September 18, 2016 - 0 Comments

    These are the tutorials to Flash Stock Rom or any custom rom using Smart Phone Flash Tool (SP Flash Tool) on any Windows Computer. Requirements: Your Android Smartphone should have at least 40-50%  (percent) of battery to perform the Flashing Full Process. How to Flash Stock Rom using Smart Phone Flash Tool  Step 1: First Download and install […]

  • Download Smart Phone Flash Tools (all Latest versions)

    by on September 19, 2016 - 0 Comments

    Smartphone flash tool is an application which is generally help you to flash Android based Stock ROM, Custom recovery and fixing in some extreme cases like firmware update, Flash recovery, unbrick bricked android device and more. SmartPhone FlashTool is working through MediaTek Android smartphones (MTK based).You should Download SP Flash Tools from our download section. You […]