InfinityBox install CM2MT2 v2.06 Module is Ready to Download.After Long time Infinity Team updates there cm2 MTK Dongle. Download InfinityBox install CM2MT2 v2.06 from below link and enjoy. Remember ! This file work with Dongle only it’s not Crack .
InfinityBox install CM2MT2 v2.05Infinity-Box software Setup Download
Whats New On CM2MT2 V2.06 ?
Infinity Chinese Miracle-2 MTK/Mediatek v2.06 – AutomaticBoot selection and other stuff
To use this software Smart-Card firmware version should be 0137 or higher.
Base:
Base – Secure boot – Automatic boot selection feature released
Base – Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
Base – Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
Base – Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
Base – Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )
Base – ModelBD – Manual Model DB update feature released
Base – ModelBD: Allow save boot configuration in sw database for future use
Base – ModelBD – Automatic Model DB update feature released
Base – ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )
Base – FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
Base – FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable
FWFlasher:
FWFlasher – Flash core updated
FWFlasher – SecureFlash on Legacy phones revised
FWFlasher – MT6771/6765 support revised
FWReader:
FWReader – More types supported for safe read
FWReader – Info reading improved
FWReader – packing revised
FWReader – more accurate data verification
Service:
Service – Format FS revised
Service – NVRAM module updated
Platform:
Platform – MT6765/MT6762 support optimized
Loaders:
LoaderDB – Lot of new agents included (Tecno, Tesla, Wiko and other)
LoaderDB – Included MT6570 “DRAM Fixed” agents used to revive devices flashed with wrong preloader ( so called “Doogee X10 bug” )
Other:
Other – Many different small changes and fixes
Other – SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
Other – ErrorHandling updated – more detailed hints/explanation of troubles during service process
Other – Preloader tools, Preloader init and other related stuff updated
Other – Partial LEGACY NAND support – optimized boot. Identify work complete if BMT autoset work correct
Info: Automatic Boot option can be switched off/on in settings menu
Info: Automatic Boot work in “SelfLearning” mode – once learned it will boot this type/device line after automatically
Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings – learn all of them !
Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things – use INFINITY ones !