How to Flash Samsung Android Mobile Using Odin

FREE

we are going to guide you, How to use Odin software to Flash Samsung Stock Firmware, Custom Firmware or Root File.

Note: Flashing the Stock Firmware on your Samsung mobile will not void the device warranty, but flashing custom rom, root file or any other patch file will void the device warranty.

Using Odin Downloader to Flash Samsung Stock or Custom Firmware
Step 1:  Download and install latest version of Samsung USB Driver on your PC (if samsung drivers are already installed on the computer then SKIP this).

Step 2:  Download the Stock rom or Custom rom that you want to flash on your Samsung Devices (if you have already downloaded the firmware rom then SKIP this step).

Step 3:  Now, Turn Off your Samsung Device.

samsung Power off

Step 4: Now there , you have to boot your Samsung device into the download mode. To Boot into Download Mode- Press and Hold Volume Down + Home + Power Button for 5-6 Seconds.

samsung device download mode

Step 5:  Now Press Volume UP Key to Continue.

Samsung Download Mode Sign

Step 6:  Download and extract the latest version of Odin Downloader to your computer (if you have already downloaded Odin Downloader then SKIP this step) and Lunch it.

odin lunch

Step 7:  Now Connect your Device to the computer. Once your device successfully connected the device to the computer then you will be able to see the Added ! message in Odin log .

 

 odin connected

Step 8: Now, Click on the AP or PDA Button to load the stock firmware or custom firmware that you want to flash on your Samsung device.

odin file selection

Step 9: when, you have added the stock firmware rom on Odin3. Then Click on Start Button to begin the flashing process.

odin flash start

Step 10. Full Flashing process may take upto 5-15 minutes and when flashing process is completed you will be able to see the Green Pass ! message. After this process your device will restart automatically.

flash done by odin

💡  If your device is stuck at the Samsung Logo after flashing the stock firmware rom for more than 10-15 minutes, then boot your device into the recovery mode. To boot into recovery mode- Press and Hold Volume UP+ Home Button + Power Button for 6-8 seconds.
💡 In recovery Mode Select Wipe Data / Factory Reset.

💡 Once Data / Factory Reset is Done. Restart your device.

💡 Now, your Samsung device will restart without any issue with the stock rom or custom rom you have downloaded.