Welcome, visitor! [ Register | Login

How to Flash Samsung Android Mobile Using Odin

Flashing Guide March 29, 2017

we are going to guide you, How to use Odin software to Flash Samsung Stock Firmware, Custom Firmware or Root File.

Note: Flashing the Stock Firmware on your Samsung mobile will not void the device warranty, but flashing custom rom, root file or any other patch file will void the device warranty.

Using Odin Downloader to Flash Samsung Stock or Custom Firmware
Step 1:  Download and install latest version of Samsung USB Driver on your PC (if samsung drivers are already installed on the computer then SKIP this).

Step 2:  Download the Stock rom or Custom rom that you want to flash on your Samsung Devices (if you have already downloaded the firmware rom then SKIP this step).

Step 3:  Now, Turn Off your Samsung Device.

samsung Power off

Step 4: Now there , you have to boot your Samsung device into the download mode. To Boot into Download Mode- Press and Hold Volume Down + Home + Power Button for 5-6 Seconds.

samsung device download mode

Step 5:  Now Press Volume UP Key to Continue.

Samsung Download Mode Sign

Step 6:  Download and extract the latest version of Odin Downloader to your computer (if you have already downloaded Odin Downloader then SKIP this step) and Lunch it.

odin lunch

Step 7:  Now Connect your Device to the computer. Once your device successfully connected the device to the computer then you will be able to see the Added ! message in Odin log .

 

 odin connected

Step 8: Now, Click on the AP or PDA Button to load the stock firmware or custom firmware that you want to flash on your Samsung device.

odin file selection

Step 9: when, you have added the stock firmware rom on Odin3. Then Click on Start Button to begin the flashing process.

odin flash start

Step 10. Full Flashing process may take upto 5-15 minutes and when flashing process is completed you will be able to see the Green Pass ! message. After this process your device will restart automatically.

flash done by odin

💡  If your device is stuck at the Samsung Logo after flashing the stock firmware rom for more than 10-15 minutes, then boot your device into the recovery mode. To boot into recovery mode- Press and Hold Volume UP+ Home Button + Power Button for 6-8 seconds.
💡 In recovery Mode Select Wipe Data / Factory Reset.

💡 Once Data / Factory Reset is Done. Restart your device.

💡 Now, your Samsung device will restart without any issue with the stock rom or custom rom you have downloaded.

                                                            

9123 total views, 8 today

  

Sponsored Links

Leave a Reply

You must be logged in to post a comment.

  • Z3X Samsung Tool Pro 34.11 Update Setup Download

    by on February 18, 2019 - 0 Comments

    Z3X Samsung Tool Pro 34.11 Free Download Link on Needrombd.com. z3x Samsung Tool Pro 34.2 allow you to sw update/change, full factory reset, switch phone to download mode, read/write calibration data files, direct unlock/read codes, FRP remove,repair, SN, DRK , Bluetooth etc. for 95% Samsung phones.Also with Samsung Editor you can change language and other […]

  • Qualcomm Dongle Premium Tool 2019 Free

    by on February 5, 2019 - 0 Comments

    Qualcomm Dongle Premium Tool 2019 is very important and free dongle tool for gsm user. this tool is developed by Nga Wai. so all credit goes to Nga Wai.  download free templates

  • Cm2 Box install CM2MT2 v2.04 Setup File

    by on February 5, 2019 - 0 Comments

    InfinityBox install CM2MT2 v2.04 Module is Ready to Download.After Long time Infinity Team updates there cm2 MTK Dongle. Download InfinityBox install CM2MT2 v2.04 from below link and enjoy. Remember ! This file work with Dongle only it’s not Crack . InfinityBox install CM2MT2 v2.04 Setup Download download free templates

  • InfinityBox CM2MT2 v2.05 Update Setup File

    by on February 27, 2019 - 0 Comments

    InfinityBox install CM2MT2 v2.05 Module is Ready to Download.After Long time Infinity Team updates there cm2 MTK Dongle. Download InfinityBox install CM2MT2 v2.05 from below link and enjoy. Remember ! This file work with Dongle only it’s not Crack . InfinityBox install CM2MT2 v2.05 Setup Download download free templates

  • CM2 Secure Boot File Oreo 8.0 File Free Download

    by on January 31, 2019 - 0 Comments

    CM2 Boot Error Fix File available here to download . Just delete the previous file and copy downloaded file into the folder.Sometimes cm2 show “[DA_ERROR] SECURITYBOOT_BOOT_NOT_ACCEPTED” on android 8.0 or 8.1 MTk devices. Download Fix file from below Link and fix boot error . download free templates